FOCAL Vestia N°3 3-way Floorstanding Speaker (Dark Wood, EACH)

3-WAY FLOORSTANDING LOUDSPEAKER

Vestia N°3 is a slender 3-way bass-reflex floorstanding
loudspeaker delivering accomplished performance. Following in the
footsteps of the Aria 936 model, it offers linear listening and outstanding
neutrality. Its impressive dynamics delivered by three bass
speaker drivers with a Slatefiber cone allow it to present the best
of Home Cinema and Hi-Fi listening alike. Meanwhile, the treble is enhanced by
another Focal technology – the ‘M’-shaped inverted dome TAM tweeter. Finally,
the tilted stands on the loudspeakers enable a soundstage focused on the
listener (Time Alignment), for even deeper immersion.

Thanks to a choice of harmonious and refined finishes –
black or white leather-effect front panel, Black High Gloss, Dark Wood or Light
Wood side panels – these loudspeakers can be easily installed in any
interior. 

Vestia N°3 is ideal for rooms from 269 sq. ft (25m²). It can
be combined with the SUB 600P subwoofer for an even higher performing
system and encompassing bass.

Sound details

THE SLATEFIBER CONE

Exclusive to Focal and made in France, Slatefiber technology
involves the use of recycled, non-woven carbon fibres applied as a filling
sandwiched between two layers of thermoplastic polymer. In their quest for
perfection, Focal engineers have opted to use non-woven carbon fibres and to
arrange them in the same direction to achieve even greater rigidity, better
damping but also lightness – the three “essentials” of a great speaker driver.

Outstanding treble

THE ‘M’-SHAPED INVERTED DOME TAM TWEETER

Also made in France in the Focal workshops, this tweeter
comprises an inverted dome cone made from an Aluminium/Magnesium alloy and molded
into the famous ‘M’ shape – a Focal exclusive. This profile lends it greater
rigidity, reducing distortion, with a wider diffusion angle. It delivers an
even finer treble.

An encompassing bass

VENTS

The Vestia loudspeakers feature a vent towards the front for
more frontal impact, in addition to one at the back for an encompassing bass: a
bass-reflex profile which enhances the depth of the soundstage.

Type
3-way bass-reflex floorstanding loudspeaker

Speaker drivers
3 x 61/2″ (16.5cm) Slatefiber Woofer
61/2″ (16.5cm) Slatefiber Midrange
1″ (25mm) Al/Mg inverted dome TAM tweeter

Sensitivity (2.83V/1m)
92dB

Frequency response (+/-3dB)
42Hz – 30kHz

Low frequency point (-6dB)
35Hz

Nominal impedance
8 Ω

Minimum impedance
2.9 Ω

Recommended amplifier power
40 – 300W

Crossover frequency
280Hz / 3,100Hz

Dimensions (WxDxH)
101/8×143/4×441/8″ (25.6×37.5×112.2cm)

Net weight (with grille)
58.4lbs (26.5 kg)

Packaging dimensions (WxDxH)
121/4×183/4×48″ (31×47.5x122cm)

Net weight (with packaging)
68.3lbs (31kg)