Audio-Technica AT-VM95SH Dual Moving Magnet Cartridge With Shibata Stylus

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata
stylus fits half-inch mount turntables. The cartridge offers excellent channel
separation and low distortion for outstanding tonal quality. The durable,
low-resonance housing includes threaded inserts that enable the cartridge to be
mounted to the headshell with just two screws – no nuts required. And since all
VM95 Series share the same body, the stylus can be replaced with any of the six
interchangeable AT-VMN95 replacement styli.

• VM95
  Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus

• Aluminum
  cantilever

• Durable
  low-resonance polymer housing

• Threaded
  inserts in cartridge body enable cartridge to be mounted to headshell with
  just two screws – no nuts required

• Compatible
  with any AT-VMN95 replacement stylus

Frequency Response	20-25,000 Hz
Channel Separation	23 (dB at 1 kHz)
Vertical Tracking Angle	23°
Vertical Tracking Force	1.8-2.2 g (2.0 g standard)
Stylus Construction	Nude square shank
Recommended Load Impedance	47,000 ohms
Coil Impedance	3.3 k ohms (1 kHz)
DC Resistance	485 ohms
Coil Inductance	550 mH (1 kHz)
Recommended load capacitance	100 to 200 pF
Output	3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance	1.5 dB (1 kHz)
Stylus Shape	2.7 x 0.26 mil Shibata
Cantilever	Aluminum pipe
Mount	Half-inch
Weight	6.1 g (0.22 oz)
Dimensions	17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D
Replacement Stylus	AT-VMN95SH
Accessories Included	Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver